CONTACT US

FEATURES:

• Pumps 16 gpm at outlet
• Interchangeable with all MICO Standpipe Assemblies
• Instantaneous fuel delivery 
• Ideal for use in multiple standpipe situations
• 30 minute duty cycle 
  

  12 VDC OPERATION Delivery of Water in Gallons per Minute
  Total Discharge Head (Water)*	0'	5'	10'	15'	20'
  G.P.M.	16	12	10.5	9	6

12 VDC OPERATION SPECIFICATIONS: 

• DUTY CYCLE of 30 minutes running time or approximately 420 gallons of water or gasoline. Prolonged dry running should be voided.
• FLUID CAPACITY
  16 GPM maximum fluid capacity at outlet
• LIGHT WEIGHT
  Complete unit pump weighs 25 lbs. Complete unit pumps consist of power head, standpipe, nozzle holder, hose,
  nozzle, and battery cable & clips. Power head alone weighs 10 lbs.
• CIRCUIT BREAKER
  A thermal overload protection circuit breaker is provided for the motor. We recommend the use of a 30 amp slow-blow fuse or circuit breaker (P/N 32-418-015) at the power source to provide cord protection.
• VISCOSITY CAPACITY
  S.A.E. 10 W at 70°F.
• POWER CONSUMPTION
  Power consumption at 12 VDC is 324 watts with a corresponding current draw of 27 amps.
• ELECTRICAL CONNECTIONS
  Electrical Connections  are quick and easy. Simply connect one clip to the positive battery terminal and the other clip to the vehicle ground.
• MOTOR
  The motor is a 1/4 H.P. permanent magnet, explosion proof type. It includes permanently lubricated precision ball bearings for armature support. The motor dose not require any lubrication. 
• MAXIMUM STATIC HEAD
  30 ft. (3/4" hose).

STANDPIPE ASSEMBLES
For use with all MICO Power Heads

FEATURES:

• Four lengths are available; 24", 30", 38" and 48".
  Custom lengths are possible.
• Unique impeller design allows for almost 100% recovery of liquid from container.
• Rotating collar adaptor allows installation without spinning entire pump and hose assembly

COMPLETE UNITS - 12 VDC

02-840-140
6012 power head with power head cord, 24" standpipe, nozzle holder, hose and nozzle.

02-840-141
6012 power head with power head cord, 30" standpipe, nozzle holder, hose and nozzle.

02-840-142
6012 power head with power head cord, 24" standpipe.

02-840-143
6012 power head with power head cord, 30" standpipe.

FLUID COMPATIBILITY - Partial List

The following is a partial list of fluids that may be used with MICO Standpipe Assemblies. A more complete application list is available upon request. Before using any solutions with MICO Standpipes other than those listed consult manufacturer.

Gasoline, Diesel Fuel, Water, Anti-freeze, Butyl Alcohol, Dry Cleaning Fluids, Ethylene Glycol, Fuel oils (No. 1, 2 amd3), Glycols, Hydraulic Fluids, Insecticides (water base type), Jet Fuel (JP-4-5-6), Kerosene, Lacquer Solvents, Lubricating Oil, Methanol, Mineral Oil, Sea Water, Trichlorethlene, Toluene, Xylene.

HERBICIDE COMPATIBILITY - Partial list

The following is a partial list of commercially available herbicides that may be used with MICO Standpipe Assemblies. Before using any solutions with MICO Standpipes, other that those listed, consult manufacturer.

Mfg.	Brand Name
CIBA-GEIGY	Aatrex, Bicep, Dual
Monsanto	Bronco, Lasso, Roundup
BASF-Wyandott Company	Basagran
Stauffer	Eptam, Eradicane, Sutazine, Sutan, Sutan +
Mobay Chemical Corp.	Turbo, Sencor, Salute
Elanco Products -
Div. Eli Lilly Co.	Treflan, Balan, Surflan
Dow Chemical Co.	2-4-D, Esteran
American Cyanamid	Prowl